Send Message
Zhejiang GBS Energy Co., Ltd.
Zhejiang GBS Energy Co., Ltd.
Home /


GBS High Energy Density LiFePO4 Battery Li-Ion Lithium Ion Battery 75Ah

Product Details

Place of Origin: CHINA

Brand Name: GBS

Certification: UL, CE, IEC62619, TS16949, ISO90001, ISO14001 etc

Model Number: GBS-LFP75Ah-C

Payment & Shipping Terms

Minimum Order Quantity: 1 PCS

Price: Negotiable

Packaging Details: special carton for special goods

Delivery Time: 10 days

Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram

Supply Ability: 1800000 PCS PER YEAR

Get Best Price
Contact Now
High Light:

lifepo4 prismatic cells


lifepo4 deep cycle battery

EV, Telecom, Solar Energy,motorcycle
38 Months
Life Cycle:
More Than 2000 Times
Light Weight
EV, Telecom, Solar Energy,motorcycle
38 Months
Life Cycle:
More Than 2000 Times
Light Weight
GBS High Energy Density LiFePO4 Battery Li-Ion Lithium Ion Battery 75Ah

GBS High Enery Density LiFePO4 Battery GBS-LFP75Ah-C





key advantages:

  • Longer service life: 3000 cycles and beyond
  • Full capacity even at high speed discharge rates
  • Fast charging without overheating and gassing
  • Lower self discharge: just few percent in a month
  • Excellent life-span: service life of 5 years and more


Item Specification Remark
Rated capacity 75Ah 0.2C rate discharge capacity
Minimum capacity 75Ah
Internal impedance ≤0.5mΩ  
Nominal voltage 3.2V  
Cell weight 1.9kg±100g  

Standard discharge


Constant current 50A  
End-of-discharge voltage 2.8V  
Standard charge method Constant current 37.5A  
Charge voltage 3.55V  
Fast charge method Constant current 50A  
Charge voltage 3.55V  
Max continuous discharge current 225A  
Cycle life 3000 cycles 80% DOD
Operating temperature

Charging ambient



Discharging ambient


Storage temperature -20~65°C  

Without break,

distortion, contamination,





Item Description Dimensions

L       Length        126mm

W     Width           37mm

H      Height          233mm






Basic Performance


(1) Output with high efficiency: Standard discharge current is 0.3C-0.8C, instant impulse discharge current is 10C for 10 seconds.


(2) Good performance under high temperature, it could work under 65°C temperature.The battery structure is safe and good.


(3) Good performance under low temperature.discharge capacity decreases to over 78% under 0°C and discharge capacity decreases to over 70% under -20°C.


(4) Good safety performance:When the pressure inside the battery is too large, the one-way safety valve will release gas and heat to make sure battery perform well. When the internal pressure reaches a certain level, the valve will be open immediately which can protect the battery from burning and explosion.


(5) Good cycle life time, the discharge capacity is still over 80% after 2000 cycle times of single cell(80%DOD).


(6) It can fast charging. It could be charged to 80% within 20 minutes and charged full with 2-3h.


(7) Low cost.


(8) No pollution during manufacture and usage.






Matters needing attention


(1) Please check if spare parts are completed when open the package and read the operation manual carefully.


(2) Do not make the battery Short Circuit,do not over charge and discharge.


(3) Please charge the new battery to full capacity before discharge for the first use.


(4) The battery pack is fixed with plate and strip before delivery, do not disassemble the plate and strip when using the battery.


(5) Checking the voltage of battery, normally it is 12.8V-13.2V.


(6) Fix BMS for battery pack and protect single cell to avoid over charge and over-discharge.


(7) Rivet or screw is used for battery connector.


(8) Please use copper part to connect battery packs and fix with hydraulic pressure plier. We could also provide the relevantconnection which fixed with screws.


(9) The charger used should be approved by our company in order to match with our lithium batteries.


(10) It will shorten battery cycle lifetime and damage battery due to overcharge and over-discharge if not do according to the above . It won’t be within our company warranty.




Requirement for safety assurance


For the sake of safety assurance, please discuss the equipment design, its system and protection circuit of Lithium-ion cell advance. And consult about the high rate current, rapid charge and special application in the same way.


Service line: +86-400-884-7799

Send your inquiry
Please send us your request and we will reply to you as soon as possible.